Call: 1-800-223-6680 Industry Standard Epoxy & Polyurea Concrete Floor Joint Fillers and Repair Products
  • Services
  • Distributors
    • Distributors in USA
    • Distributors in Canada
    • Distributors in Mexico
    • International Distributors
  • Technical Support Team
  • Contact Us
    • Contact Us
    • Facebook
    • Twitter
    • LinkedIn
    • YouTube
    • Instagram
Metzger McGuire
  • Metzger McGuire
  • Products
    • Epoxies
      • MM-80
      • MM-80P
      • MM-80P FS
      • MM-80 KRP
      • Armor-Hard/Kit
      • Armor-Hard Extreme
      • Armor-Hard Primer
      • Armor-Hard HDR
      • PATCH-1
    • Polyureas
      • Edge-Pro 80
      • Edge-Pro 90
      • Rapid Refloor
      • Rapid Refloor Pit Grout
      • Rapid Refloor XP
      • Spal-Pro 2000
      • Spal-Pro RS 88
      • Spal-Pro RS 65
      • Spal-Pro RSF
      • SRG
    • Joint Fillers
      • MM-80
      • MM-80P
      • MM-80P FS
      • Edge-Pro 80
      • Edge-Pro 90
      • Spal-Pro RS 65
      • Spal-Pro RS 88
      • Spal-Pro RSF
    • Joint Repair
      • MM-80
      • MM-80P
      • MM-80 KRP
      • Spal-Pro RS 88
      • Spal-Pro 2000
    • Joint Rebuild/Repair
      • Armor-Hard/Kit
      • Armor-Hard Extreme
      • MM-80 KRP
      • Rapid Refloor XP
    • Crack Repair
      • MM-80
      • MM-80P
      • Spal-Pro RS 88
      • Edge-Pro 80
      • Edge-Pro 90
      • Rapid Refloor
      • Spal-Pro 2000
      • SRG
    • Surface Repair
      • Armor-Hard/Kit
      • Armor-Hard Extreme
      • Armor-Hard HDR
      • MM-80 KRP
      • Rapid Refloor
      • Rapid Refloor XP
      • PATCH-1
    • Grouts for Pitting
      • Rapid Refloor Pit Grout
      • SRG
    • Concrete Slab Stabilization
      • Spal-Pro Stabilizer
      • Stabilizer EXP
    • Accessories
      • SPF and SPF-P
      • M-Flush
      • Accessory Guide
    • Product Catalog
    • Before and After Gallery
  • Floor Repair
    • Guide to Basic Floor Repairs
    • Repair Products
    • Repair Details
    • Repair Articles
  • Videos
    • All Videos
    • Proper Floor Repair Preparation Instructions
    • Product Mixing/Cartridge Instructions
    • Material Installation Instructions
  • Related Equipment
    • Dispensing Pumps
    • Dispensing Guns
    • Joint Clean Out/Repair Saws
    • Crack Chasing Equipment
    • Saw Blades & Brushes
    • Dust Collection Systems
  • Bulletins & Specs
    • Standard Specs
    • Articles
    • Technical Bulletins
    • Silica Standards
    • SDS Library
  • Trainings & Events
  • EPD
  • Home
  • Concrete Slab Filler

Concrete Slab Filler : Our Epoxy and Polyurea Joint Filler Products Can Protect and Repair Concrete Slab Floor Joints and Surfaces

For concrete slab fillers, look to our variety of epoxy and polyurea filler products, semi-rigid, rigid as well as structural, to suit your individual concrete slab repair and joint filling needs

When it comes to concrete slab filler, our epoxy and polyurea joint filler products, both rigid and semi-rigid concrete slab fillers, are designed for use on heavy trafficked, industrial concrete floors to fill and protect contraction and construction joints in industrial concrete slab floors. Due to their extended working pot life, our concrete slab fillers can be mixed by hand, and they allow for the addition of sand and aggregates if desired. Many of our slab fillers can be customized to your color or ordered in any one of our 72 standard joint filler colors 

Epoxy Concrete Slab Floor Fillers

We Manufacture and Supply Both Rigid and Semi-Rigid Epoxy Concrete Slab Fillers

We offer two types of epoxy joint fillers for concrete crack repair in concrete slab environments: semi-rigid and structural. A semi-rigid epoxy floor joint filler can be used for filling joints in a newly placed concrete slab floor or for repairing deteriorated joints in an existing concrete slab floor. A semi-rigid filler is also a good choice for repairing a concrete crack that is subject to movement or that may continue to open during the concrete drying-shrinkage process.

Structural epoxies are used to structurally repair or rebuild concrete slab surfaces and are especially well suited for repairing larger slab surface defects or holes. When used in combination with sand or aggregates, structural epoxy fillers are ideal for repairing and rebuilding concrete floor joint edges or broken slab panel corners.

Polyurea Concrete Slab Fillers

For High Trafficked Industrial Concrete Slabs That Need Fast Cure Times, are Able to Handle Heavy Equipment, Need to Meet low Curing Temperatures and Other Specifications Such as for use on Colored Polished Concrete Slab Floors

Our polyurea concrete slab joint filler products are designed for use on indoor industrial, retail, or commercial polished concrete slab floors. While our semi-rigid polyurea fillers are primarily used for concrete crack and joint repair, our structural fillers are best used for surface repairs on concrete slab floors. Polyureas are durable and are designed to withstand pedestrian traffic and the weight of hard wheels, heavy loads, and carts shortly after application. During new construction work, polyurea products ensure that other trades can continue to operate on the floor within about an hour of application.

Polyurea Concrete Slab Fillers – Two Products, One Great Outcome

We offer two types of polyurea joint fillers: semi-rigid and structural. Semi-rigid polyurea control joint fillers can be used to fill joints in a newly placed concrete slab floor or to repair joints in an existing floor. They are also a good choice for repairing cracks that are subject to movement or that may continue to open during the concrete drying-shrinkage process. Additionally, polyurea joint fillers are also an excellent choice for applications in freezer and cooler buildings, as they cure at temperatures as low as -30°F.

Structural polyurea fillers are used to structurally repair or rebuild concrete surfaces through the restoration of all types of surface defects such as popouts, gouges, bolt holes, cracks, etc. When used in combination with sand or aggregates, they are ideal for rebuilding joint edges or broken slab panel corners. Due to their excellent adhesion and low viscosity, structural polyureas can also be used as grouting or resurfacing products when the need exists to fill large areas of surface pitting or micro pits in concrete floors before they are polished.

Concrete Slab Filler for Colored Concrete Slab Floor Applications

Most Metzger/McGuire polyurea products are available in 72 standard ColorFast colors with limitless custom color options available upon request. We invite you to browse our polyurea joint filler options below to see which best suits your needs.

Our polyurea joint filler products and other concrete crack repair and maintenance products have been setting the standard in our industry for more than 20 years. We have products that will repair cracks, spalls, gouges, missed saw cuts, joint deterioration, and pop outs.

Our Concrete Slab Fillers, Both Epoxy and Polyurea, Have Been Setting the Standard for Decades

Superior Epoxy and Polyurea Concrete Slab Fillers You Can Count On – Our epoxy and polyurea joint filler products and other concrete crack repair and maintenance products for concrete slabs have been setting the standard in our industry for decades. We have products that will repair cracks, spalls, gouges, missed saw cuts, joint deterioration, and popouts in concrete slab floors. Please call us for more information or to find a local distributor at 800.223.6680

Metzger/McGuire Epoxy and Polyurea Joint Filler Comparison Chart

We invite you to browse our different concrete slab filler products and more. Read more about our epoxy products below to see which best suits your needs. There is no better choice for joint edge protection in heavily trafficked industrial concrete slab floors than an epoxy joint filler.

Our Epoxy Products

MM-80

MM-80 is a 100% solids, two component, heavy duty semi-rigid epoxy joint filler designed to fill and protect contraction and construction joints in industrial concrete floors. The industry’s first semi-rigid joint filler and still widely known as the “industry standard” in floor joint protection.
SEE DETAILS >>

MM-80P

MM-80P is a 100% solids, two component, heavy duty semi-rigid epoxy joint filler designed to fill and protect contraction and construction joints in industrial concrete floors. MM-80P is a rebalanced version of our MM-80 offering a 1:1 mix ratio for use with dual component pumps.
SEE DETAILS >>

Armor-Hard LV

Armor-Hard LV is a two-component, 100% solids, extended pot life structural epoxy system designed for the repair of surface spalls and defects in heavily trafficked industrial concrete floors. When cured, Armor-Hard LV is a gray, rigid restoration material with a Shore D Hardness of 86.
SEE DETAILS >>

Armor-Hard Extreme

Armor-Hard Extreme is a 100% solids, two component fast set structural epoxy/epoxy mortar kit intended for use in the structural repair or joints, cracks and other surface defects in industrial concrete floors. Armor-Hard Extreme’s fast set chemistry allows for return to service in as little as 2 hours and allows for installation in temperatures as low as 20ºF (-7ºC). Kit includes a specially engineered aggregate blend designed for easy troweling/finishing.
SEE DETAILS >>

Armor-Hard

Armor-Hard is a 100% solids, two component structural epoxy mortar kit intended for use in the structural repair or joints, cracks and other surface defects in industrial concrete floors. Armor-Hard Kit comes with a specially engineered aggregate blend designed for easy troweling/finishing.
SEE DETAILS >>

Armor-Hard HDR

Sp Armor-Hard HDR is a 100% solids, odorless, chemical resistant troweled epoxy flooring system. It’s ideal for use in new or old damaged concrete floors and isdesigned to provide outstanding protection against a wide range of severe mechanical abuses typically found in industrial environments. Adhesion to concrete, woodand most metals is excellent.
SEE DETAILS >>

Armor-Hard Primer

Armor-Hard PRIMER is a 100% solids, low viscosity, two-part epoxy for use as a primer to enhance substrate adhesion with the Armor-Hard line of products including Armor-Hard HDR, Armor-Hard and Armor-Hard Extreme
SEE DETAILS >>

 

Our Polyurea Products

EDGE-PRO 90

Edge-Pro 90 is a two-part, 100% solids, rapid-setting polyurea polymer liquid system. When cured, Edge-Pro 90 is a rubberlike solid with a shore hardness of A90-92

SEE DETAILS >>

EDGE-PRO 80

Edge-Pro 80 is a two-part, 100% solids, rapid-setting polyurea polymer liquid system. When cured, Edge-Pro 80 is a rubberlike solid with a hardness of Shore A 80-81.
SEE DETAILS >>

RAPID REFLOOR

Rapid Refloor is a 100% solids, two component,low viscosity structural polyurea/polyurethane hybrid intended for use in repairing cracks and small surface defects such as bolt holes and pop-outs in industrial, retail or commercial concrete floors. Rapid Refloor’s rapid set chemistry allows for return to service in 30 minutes ..
SEE DETAILS >>

RAPID REFLOOR PIT GROUT

Rapid Refloor Pit Grout is a two-component, 100% solids structural polyurethane/polyurea hybrid. When cured, Rapid Refloor Pit Grout is a rigid structural polymer with a Shore D Hardness of 70-75..
SEE DETAILS >>

RAPID REFLOOR XP

Rapid Refloor XP is a two-component, 100% solids structural polyurethane/polyurea hybrid. When cured, Rapid Refloor XP is a rigid structural polymer with a Shore D Hardness of 75-80.
SEE DETAILS >>

SPAL-PRO 2000

Spal-Pro 2000 is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in repairing joints and cracks in industrial and freezer/cooler concrete floors. Spal-Pro 2000 can be applied in temperatures as low as -30ºF (-35ºC) and allows for a return to service in 30 minutes or less.
SEE DETAILS >>

SPAL-PRO RS 88

Spal-Pro RS 88 is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in filling and protecting contraction and construction joints in industrial, retail or commercial concrete floors.
SEE DETAILS >>

SPAL-PRO RS 65

Spal-Pro RS 65 is a 100% solids, two component rapid setting semi-rigid polyurea joint “sealant” intended for use in filling and protecting contraction and construction joints in retail or commercial concrete floors.
SEE DETAILS >>

SPAL-PRO RSF

Spal-Pro RSF is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in filling and protecting contraction and construction joints in industrial and freezer/cooler concrete floors. RSF can be applied in temperatures as low as -30ºF (-35ºC).
SEE DETAILS >>

SRG

SRG is a low viscosity structural polyurea polymer product designed to fill pinholes and other micro defects in concrete floors that will be ground/polished. When installed properly SRG can enhance the concrete surface’s durability and increase the surface’s reflective gloss.
SEE DETAILS >>

Call Us For More Information

1-800-223-6680

p: 603-224-6122 f: 603-224-6020

Mailing Address
P.O. Box 2217
Concord, NH 03302
Shipping Address
8 Integra Dr.
Concord, NH 03301

Request Information or Quote

  • This field is for validation purposes and should be left unchanged.

Warranty Request Form

Locate A Distributor

Metzger/McGuire maintains a wide network of Authorized Distributors across the United States and across the globe to ensure that you have access to not only our products but also the tools and accessories you need to ensure a successful project.

Distributors in Mexico
Distributors in Canada
International Distributors

Distributors in the United States

Click on map to find distributors in your area.

Proud Members of:

ASCC logo

Known by the Floors We Protect

Toll Free: 800-223-MM80
P: 603-224-6122 F: 603-224-6020
...

Mailing Address
P.O. Box 2217
Concord, NH 03302
Shipping Address
8 Integra Dr.
Concord, NH 03301

Metzger/McGuire, for more than 50 years, The Industry Leader in Concrete Epoxy and Polyurea Joint Fillers, Reconstruction and Rebuild Mortars, Slab Stabilizers, and Floor Finish Products Such As Chemical Densifiers, Pit Grouts and More

About MetzgerMcGuire

When it comes to the specification and use of industrial expansion, contraction joint fillers and control joint fillers, crack and joint edge repair products, as well as surface preparation materials like fine grouting products for the construction, repair, and maintenance of polished concrete floors, including those stained and colored, Metzger/McGuire has been setting the industry standard for 50 years.

Metzger/McGuire – Known by the Floors We Protect

Our concrete floor products have been specified in, and utilized on, countless construction projects over the decades by some of the world’s most respected architects and construction companies. Many of the world’s most recognizable brands have historically and continue to trust Metzger/McGuire products to protect and enhance their workplace, retail, showroom, warehouse and office floors. Brands like Amazon, WalMart, Target, Costco, Ford and many others, have recognized the value inherent in protecting their floors with the world’s leading concrete floor construction and repair products.

If you need assistance preparing your bid packet, or need additional information pertaining to joint and expansion fillers, edge and crack repair or reconstruction products, processes, or services for your upcoming project please reach out to a MetzgerMcGuire polished concrete specialist for their assistance today.

Some of the polished concrete floor applications we enhance and protect with our industry leading epoxy and polyurea products including joint fillers, reconstruction and surface products like structural epoxy mortars, under-slab stabilizers, pit grouts and chemical densifiers:

  • Warehouse Floors
  • Robotic Warehouse Floors
  • Distribution Centers Floors
  • Manufacturing Floors
  • Showroom Floors
  • Robotic Distribution Center Floors
  • Pharmaceutical Manufacturing Floors
  • Automotive Manufacturing Floors
  • Chemical Manufacturing Floors
  • Apparel Manufacturing Floors
  • Textile Manufacturing Floors
  • Rubber and Plastic Manufacturing Floors
  • Data Center Floors
  • Big Box Retail Floors
  • Retail floors
  • Polished concrete Floors
  • Fresh and Frozen Food Warehouses and Distribution Center Floors
  • Retail Grocery Floors
  • Manufacturing Floors
  • Restaurant Floors
  • Boutique Retail Floors
  • College and University Campus Floors
  • Municipal Building Floors
  • Airport and Transportation Facility Floors
  • Light Commercial Building Floors
  • High End Residential Floors
  • Office Floors

Our Industry Leading Products are Used in the Following Applications

  • Epoxy Concrete Joint Filler
  • Epoxy Joint Filler
  • Epoxy Joint Sealants
  • Concrete Joint Filler
  • Concrete Expansion Joint Filler
  • Control Joint Filler
  • Concrete Fillers
  • Concrete Joint Sealants
  • Contraction Joint Fillers
  • Concrete Crack Repair
  • Damaged Concrete Edges
  • Industrial Floor Repair Products
  • Concrete Spalling
  • Slab Stabilization
  • Concrete Slab Filler
  • Polyurea Joint Sealants

Unrivaled Technology, Exceptional Customer Service, The Industries Deepest Technical Expertise, And The Most Dedicated Staff, Have All Lead To The Market Leading Reputation We Enjoy, And Earn Every Day. We Consider It Our Greatest Asset

Metzger/McGuire has earned a market leading reputation by providing top quality products, exceptional customer service, the industry’s deepest technical expertise, and consistently high-quality color matches for that perfect finish when it comes to industrial joint fillers and concrete floor repair products for all types of concrete flooring. Today’s robotic warehouses that use ASRS, G2P,AGV,AGC,and AMR’s all demand floor finishes to exacting standards, why not look to the industry leader to provide those products that mean the most to your finished floor surface and it’s ability to efficiently support today’s leading robotic warehousing technology!

When it Comes to Color Matching Technology, Our Floor Products Truly Shine

Having pioneered semi-rigid joint fillers almost 50 years ago, including color matched industrial joint fillers, Metzger/McGuire can offer you consistently high color matches for all of your stained and polished floors. Whether you need a custom color match, or choose from a large variety of our semi-custom off the shelf colors, you can be assured that you’ve made the best investment in your polished concrete floor’s protection and serviceability.

With Metzger/McGuire as your partner, the finished product is guaranteed to be both functional and beautiful. Call MetzgerMcGuire today to speak to a product specialist 1-800-223-6680

TOP