Joint Filler Suppliers – Metzger/McGuire Industry Leading Joint Fillers are Available Globally from a Select Group of Authorized Distributors and Suppliers

Edge-Pro 90

Edge-Pro 90 is a two-part, 100% solids, rapid-setting polyurea polymer liquid system. When cured, Edge-Pro 90 is a rubberlike solid with a shore hardness of A90-92 SEE DETAILS >>

Edge-Pro 80

Edge-Pro 80 is a two-part, 100% solids, rapid-setting polyurea polymer liquid system. When cured, Edge-Pro 80 is a rubberlike solid with a hardness of Shore A 80-81. SEE DETAILS >>

Rapid Refloor

Rapid Refloor is a 100% solids, two component,low viscosity structural polyurea/polyurethane hybrid intended for use in repairing cracks and small surface defects such as bolt holes and pop-outs in industrial, retail or commercial concrete floors. Rapid Refloor’s rapid set chemistry allows for return to service in 30 minutes .. SEE DETAILS >>

Rapid Refloor Pit Grout

Rapid Refloor Pit Grout is a two-component, 100% solids structural polyurethane/polyurea hybrid. When cured, Rapid Refloor Pit Grout is a rigid structural polymer with a Shore D Hardness of 70-75.. SEE DETAILS >>

Rapid Refloor XP

Rapid Refloor XP is a two-component, 100% solids structural polyurethane/polyurea hybrid. When cured, Rapid Refloor XP is a rigid structural polymer with a Shore D Hardness of 75-80. SEE DETAILS >>

Spal-Pro 2000

Spal-Pro 2000 is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in repairing joints and cracks in industrial and freezer/cooler concrete floors. Spal-Pro 2000 can be applied in temperatures as low as -30ºF (-35ºC) and allows for a return to service in 30 minutes or less. SEE DETAILS >>

Spal-Pro RS 88

Spal-Pro RS 88 is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in filling and protecting contraction and construction joints in industrial, retail or commercial concrete floors. SEE DETAILS >>

Spal-Pro RS 65

Spal-Pro RS 65 is a 100% solids, two component rapid setting semi-rigid polyurea joint “sealant” intended for use in filling and protecting contraction and construction joints in retail or commercial concrete floors. SEE DETAILS >>

Spal-Pro RSF

Spal-Pro RSF is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in filling and protecting contraction and construction joints in industrial and freezer/cooler concrete floors. RSF can be applied in temperatures as low as -30ºF (-35ºC). SEE DETAILS >>

SRG

SRG is a low viscosity structural polyurea polymer product designed to fill pinholes and other micro defects in concrete floors that will be ground/polished. When installed properly SRG can enhance the concrete surface’s durability and increase the surface’s reflective gloss. SEE DETAILS >>

MM-80

MM-80 is a 100% solids, two component, heavy duty semi-rigid epoxy joint filler designed to fill and protect contraction and construction joints in industrial concrete floors. The industry’s first semi-rigid joint filler and still widely known as the “industry standard” in floor joint protection. SEE DETAILS >>

MM-80P

MM-80P is a 100% solids, two component, heavy duty semi-rigid epoxy joint filler designed to fill and protect contraction and construction joints in industrial concrete floors. MM-80P is a rebalanced version of our MM-80 offering a 1:1 mix ratio for use with dual component pumps. SEE DETAILS >>

Armor-Hard LV

Armor-Hard LV is a two-component, 100% solids, extended pot life structural epoxy system designed for the repair of surface spalls and defects in heavily trafficked industrial concrete floors. When cured, Armor-Hard LV is a gray, rigid restoration material with a Shore D Hardness of 86. SEE DETAILS >>

Armor-Hard Extreme

Armor-Hard Extreme is a 100% solids, two component fast set structural epoxy/epoxy mortar kit intended for use in the structural repair or joints, cracks and other surface defects in industrial concrete floors. Armor-Hard Extreme’s fast set chemistry allows for return to service in as little as 2 hours and allows for installation in temperatures as low as 20ºF (-7ºC). Kit includes a specially engineered aggregate blend designed for easy troweling/finishing. SEE DETAILS >>

Armor-Hard

Armor-Hard is a 100% solids, two component structural epoxy mortar kit intended for use in the structural repair or joints, cracks and other surface defects in industrial concrete floors. Armor-Hard Kit comes with a specially engineered aggregate blend designed for easy troweling/finishing. SEE DETAILS >>

Armor-Hard HDR

Sp Armor-Hard HDR is a 100% solids, odorless, chemical resistant troweled epoxy flooring system. It’s ideal for use in new or old damaged concrete floors and isdesigned to provide outstanding protection against a wide range of severe mechanical abuses typically found in industrial environments. Adhesion to concrete, woodand most metals is excellent. SEE DETAILS >>

Armor-Hard Primer

Armor-Hard PRIMER is a 100% solids, low viscosity, two-part epoxy for use as a primer to enhance substrate adhesion with the Armor-Hard line of products including Armor-Hard HDR, Armor-Hard and Armor-Hard Extreme SEE DETAILS >>