Faster Set Epoxy Joint Filler

Fill and Protect Joints in Industrial Concrete Floors

Composition

MM-80P FS is a two-component, 100% solids faster set epoxy joint filler. When cured, MM-80P FS is a gray, semi-rigid (hard but slightly resilient) filler with a Shore hardness of A90-95.

Shore A Hardness: A90-95

LEED Compliant: Yes, Download the LEED Compliance Letter  United States |  Canada
CDPH V 1.2/USGBC LEED V4 TEST CERTIFICATE

 

Packaging:

10 Gallon Bulk Kit

Basic Use

MM-80P FS was developed to fill and protect joints in industrial concrete floors that are subject to hard wheeled material handling traffic and heavy loads. Its primary function is to support such traffic and protect joint edges from spalling. MM-80P FS is designed for use in areas where final temperatures are from 40˚F (10˚C) to +120˚F (49˚C). It is also ideal for joint and crack repair.

Related Products

MM-80 is available in three versions: MM-80P (P for pump) and MM80P FS, with 1:1 mix ratios and the standard MM-80 in a 5:1 mix ratio. MM-80 and MM-80P and MM-80P FS are available in silicone-free formulations for use in automotive/paint facilities.

Our industrial and polished concrete floor joint fillers and repair and maintenance products have been setting the standard in our industry for decades. We have products that will protect and repair joints, cracks, surface defects, gouges, bolt holes and more. Call us at 800.223.6680 for more information or to find a local distributor. Metzger McGuire

Download Information

TOP