Kevlar Enhanced Repair Mortar

Repair and Protect Joints in Interior Industrial Concrete Floors

Composition

MM-80 KRP Kit is a three-component, 100% solids faster set semi-rigid epoxy repair mortar. When cured, MM-80 KRP Kit is a semi-rigid (hard but slightly resilient) repair mortar with a Shore hardness of A98+.

Shore A Hardness: A98+

LEED Compliant: Yes, Download the LEED Compliance Letter  United States |  Canada

Packaging:

Pail Kit includes 1 gallon Part A Resin, 1 Gallon Part B Hardener and 2 gals. engineered aggregate blend. Yield: 780 cubic inches or 3.4 U.S. gallons.

Basic Use

MM-80 KRP Kit was developed to repair and protect joints in interior industrial concrete floors that are subject to hard wheeled material handling traffic and heavy loads. Its primary function is to support such traffic and protect joint edges from spalling. MM-80 KRP Kit is designed for use in areas where final temperatures are from 40˚F (10˚C) to +120˚F (49˚C).

Related Products

MM-80 KRP is available in two versions: MM-80 KRP Kit, which consists of three components and includes a pre-engineered aggregate blend. MM-80 KRP is also available in 10 gallon kits by special order. Call for details. Both are available in silicone-free formulations for use in automotive/paint facilities.

Advantages

MM-80 KRP’s backbone is a faster setting formulation of our MM-80P and is further enhanced with Kevlar©. When combined with the KRP Kit’s preengineered aggregate blend it creates a high Shore A semi-rigid mortar with superior durability and toughness in wider joint exposures.

MM-80 KRP Kit’s superior formulation yields sufficient rigidity to support loads crossing joints, protecting edges from spalling, and sufficient resiliency to prevent brittleness throughout the floor’s service life.

Because MM-80 KRP Kit is a semi-rigid mortar, it will not weld or restrain slab movement and eliminates the need to rehonor and refill the control joint in the repair area as is necessary when structurally rebuilding wide joints.

MM-80 KRP Kit is a faster setting semi-rigid epoxy mortar and allows access to repaired joints in as little as 3-4 hours after placement vs. 8-12 hours for standard aggregate-modified semi-rigid epoxy joint fillers.

MM-80 KRP Kit is a available in 4 colors (Dovetail Gray, Standard Gray, Porpoise and Natural) to best blend in repairs aesthetically with the floor canvas.

Our industrial and polished concrete floor joint fillers and repair and maintenance products have been setting the standard in our industry for decades. We have products that will protect and repair joints, cracks, surface defects, gouges, bolt holes and more. Call us at 800.223.6680 for more information or to find a local distributor. Metzger McGuire

Download Information

Call Us For More Information

1-800-223-6680

p: 603-224-6122 f: 603-224-6020

Mailing Address
P.O. Box 2217
Concord, NH 03302
Shipping Address
8 Integra Dr.
Concord, NH 03301

Request Information or Quote

Warranty Request Form

Locate A Distributor

Metzger/McGuire maintains a wide network of Authorized Distributors across the United States and across the globe to ensure that you have access to not only our products but also the tools and accessories you need to ensure a successful project.

Distributors in Mexico
Distributors in Canada
International Distributors

Distributors in the United States

Click on map to find distributors in your area.

Proud Members of:

ASCC logo

Known by the Floors We Protect

Toll Free: 800-223-MM80
P: 603-224-6122 F: 603-224-6020

Mailing Address
P.O. Box 2217
Concord, NH 03302
Shipping Address
8 Integra Dr.
Concord, NH 03301

Metzger/McGuire, for more than 50 years, The Industry Leader in Concrete Epoxy and Polyurea Joint Fillers, Reconstruction and Rebuild Mortars, Slab Stabilizers, and Floor Finish Products Such As Chemical Densifiers, Pit Grouts and More

About MetzgerMcGuire

When it comes to the specification and use of industrial expansion, contraction joint fillers and control joint fillers, crack and joint edge repair products, as well as surface preparation materials like fine grouting products for the construction, repair, and maintenance of polished concrete floors, including those stained and colored, Metzger/McGuire has been setting the industry standard for 50 years.

Metzger/McGuire – Known by the Floors We Protect

Our concrete floor products have been specified in, and utilized on, countless construction projects over the decades by some of the world’s most respected architects and construction companies. Many of the world’s most recognizable brands have historically and continue to trust Metzger/McGuire products to protect and enhance their workplace, retail, showroom, warehouse and office floors. Brands like Amazon, WalMart, Target, Costco, Ford and many others, have recognized the value inherent in protecting their floors with the world’s leading concrete floor construction and repair products.

If you need assistance preparing your bid packet, or need additional information pertaining to joint and expansion fillers, edge and crack repair or reconstruction products, processes, or services for your upcoming project please reach out to a MetzgerMcGuire polished concrete specialist for their assistance today.

Some of the polished concrete floor applications we enhance and protect with our industry leading epoxy and polyurea products including joint fillers, reconstruction and surface products like structural epoxy mortars, under-slab stabilizers, pit grouts and chemical densifiers:

Our Industry Leading Products are Used in the Following Applications

Unrivaled Technology, Exceptional Customer Service, The Industries Deepest Technical Expertise, And The Most Dedicated Staff, Have All Lead To The Market Leading Reputation We Enjoy, And Earn Every Day. We Consider It Our Greatest Asset

Metzger/McGuire has earned a market leading reputation by providing top quality products, exceptional customer service, the industry’s deepest technical expertise, and consistently high-quality color matches for that perfect finish when it comes to industrial joint fillers and concrete floor repair products for all types of concrete flooring. Today’s robotic warehouses that use ASRS, G2P,AGV,AGC,and AMR’s all demand floor finishes to exacting standards, why not look to the industry leader to provide those products that mean the most to your finished floor surface and it’s ability to efficiently support today’s leading robotic warehousing technology!

When it Comes to Color Matching Technology, Our Floor Products Truly Shine

Having pioneered semi-rigid joint fillers almost 50 years ago, including color matched industrial joint fillers, Metzger/McGuire can offer you consistently high color matches for all of your stained and polished floors. Whether you need a custom color match, or choose from a large variety of our semi-custom off the shelf colors, you can be assured that you’ve made the best investment in your polished concrete floor’s protection and serviceability.

With Metzger/McGuire as your partner, the finished product is guaranteed to be both functional and beautiful. Call MetzgerMcGuire today to speak to a product specialist 1-800-223-6680

TOP