• Banner March 2014
  • Color_Box_Photo
  • metzger-home-slide-3
  • metzger-home-slide-4.2
  • New Products EP80  Website
  • Industrial and Retail Concrete Floor Joint Fillers and Repair Products

    “Known by the Floors We Protect” for More than 40 Years
  • ColorFast Floor Joint Fillers and Repair Materials

    A complete line of standard and custom colored materials to meet your project’s needs
  • Industrial Concrete Floor Repair Solutions

    Highest quality repair materials and expert support ensure long-lasting repair solutions
  • Stained/Polished Concrete Floor Remodel and Repair

    Wide selection of colored repair materials to expertly restore existing concrete floors
  • Moderate-Duty, Semi-Rigid Polyurea Joint Filler for Retail and Warehouse Concrete Floors

a b c d e f g h i j k l m n o p q r s t u v w x y z #

Repair Products For Concrete Floors—Including Industrial, Commercial, and Retail

Our products can repair concrete cracks, fill contraction and construction joints, stabilize slabs, and fix surface defects

 

Our concrete repair products are intended to correct a variety of issues in industrial, commercial, and retail concrete floors. Whether you need to repair cracks or joints, stabilize under slabs, fix surface imperfections, or resurface a floor’s finish, we have a product to suit your needs. For more than 40 years, we have been the leaders in concrete floor repair products.

Among our most popular products are those that are used as structural fillers. These materials—often epoxies and polyureas—are used to repair cracks and rebuild damaged contraction and construction joints. By repairing or rebuilding joints with an epoxy or polyurea, joint shoulders or edges gain better support, which in turn means that future deterioration is less likely to occur. If you’re looking to repair a floor’s surface, we have specific products that are intended to fix surface defects, such as gouges, scratches, pop outs, air holes, bolt holes, surface spalls, surface pitting, etc.

Since we specialize in industrial, commercial, and retail concrete floor repairs, we know the special set of logistics that goes along with each of these types of projects. Furthermore, we understand the potential costs in lost sales or lost productivity that can result from extended downtime for repairs. That’s why we offer products that can allow you to restore traffic in minutes rather than hours or days. Our products are also available in a wide array of colors to help you best hide the repairs.

All Metzger/McGuire concrete repair products are 100% solids and are compliant with the U.S. Green Building Council’s LEED (Leadership in Energy and Environmental) standards and are acceptable for use in facilities subject to regulation by USA, FDA, and CFIA. Please call us for more information or to find a local distributor at 800-223-6680 

Metzger/McGuire Epoxy and Polyurea Joint Filler Comparison Chart

 

 

 

MM-80 MM-80

MM-80 is a 100% solids, two component, heavy duty semi-rigid epoxy joint filler designed to fill and protect contraction and construction joints in industrial concrete floors. The industry’s first semi-rigid joint filler and still widely known as the “industry standard” in floor joint protection.

Spal-Pro 2000 Spal-Pro 2000

Spal-Pro 2000 is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in repairing joints and cracks in industrial and freezer/cooler concrete floors. Spal-Pro 2000 can be applied in temperatures as low as -30ºF (-35ºC) and allows for a return to service in 30 minutes or less.

Rapid Refloor Rapid Refloor

Rapid Refloor is a 100% solids, two component,low viscosity structural polyurea/polyurethane hybrid intended for use in repairing cracks andsmall surface defects such as bolt holes and pop-outs in industrial, retail or commercial concrete floors. Rapid Refloor’s rapid set chemistry allows for return to service in 30 minutes or less.

Rapid Refloor XP Rapid Refloor XP

Rapid Refloor XP is a two-component, 100% solids structural polyurethane/polyurea hybrid. When cured, Rapid Refloor XP is a rigid structural polymer with a Shore D Hardness of 75-80.

Rapid Refloor PIT GROUT Rapid Refloor PIT GROUT

Rapid Refloor Pit Grout is a two-component, 100% solids structural polyurethane/polyurea hybrid.  When cured, Rapid Refloor Pit Grout is a rigid structural polymer with a Shore D Hardness of 70-75.

Armor Hard LV Armor Hard LV

Armor-Hard LV is a two-component, 100% solids, extended pot life structural epoxy system designed for the repair of surface spalls and defects in heavily trafficked industrial concrete floors. When cured, Armor-Hard LV is a gray, rigid restoration material with a Shore D Hardness of 86.

SRG SRG

SRG is a low viscosity structural polyurea polymer product designed to fill pinholes and other micro defects in concrete floors that will be ground/polished. When installed properly SRG can enhance the concrete surface’s durability and increase the surface’s reflective gloss. 

 

Armor Hard Extreme Armor Hard Extreme

Armor-Hard Extreme is a 100% solids, two component fast set structural epoxy/epoxy mortar kit intended for use in the structural repair or joints, cracks and other surface defects in industrial concrete floors. Armor-Hard Extreme’s fast set chemistry allows for return to service in as little as 2 hours and allows for installation in temperatures as low as 20ºF (-7ºC). Kit includes a specially engineered aggregate blend designed for easy troweling/finishing.

Armor Hard Armor Hard

Armor-Hard is a 100% solids, two component structural epoxy mortar kit intended for use in the structural repair or joints, cracks and other surface defects in industrial concrete floors. Armor-Hard Kit comes with a specially engineered aggregate blend designed for easy troweling/finishing.

Armor-Hard HDR Armor-Hard HDR

Armor-Hard HDR is a 100% solids, odorless, chemical resistant troweled epoxy flooring system. It’s ideal for use in new or old damaged concrete floors and isdesigned to provide outstanding protection against a wide range of severe mechanical abuses typically found in industrial environments. Adhesion to concrete, woodand most metals is excellent.

Armor Hard Primer Armor Hard Primer

Armor-Hard PRIMER is a 100% solids, low viscosity, two-part epoxy for use as a primer to enhance substrate adhesion with the Armor-Hard line of products including Armor-Hard HDR, Armor-Hard and Armor-Hard Extreme.

Spal-Pro Stabilizer Spal-Pro Stabilizer

Spal-Pro Stabilizer is a 100% solids, two component semi-rigid polyurea polymer intended for use in underslab stabilization of deflecting/rocking concrete floor panels. Spal-Pro Stabilizer allows for return to service in 60 minutes or less.

Stabilizer EXP Stabilizer EXP

Spal-Pro Stabilizer EXP is a 100% solids, two component, high-density hydrophobic polyurethane expanding foam for use in underslab stabilization of deflecting/rocking concrete floor panels. Spal-Pro Stabilizer EXP allows for return to service in 60 minutes or less.